Forum > General Tech

Jeep Cherokee Power brakes

(1/1)

Jcrum:
Hey Gary
what year jeep did your Power brake booster from. Was it new or used and I wanting to see if you have any more pictures to see how much clearance have.


http://www.bigbendbroncos.com/forum2/index.php?topic=22.msg127#msg127

JustaFordGuy:
I'm thinking it was a mid to late 90s Cherokee but I'm not positive. I got it from Pick & Pull. I really had to rig it to make it fit but it works great. I made a bracket about 2" wide to bolt it to the existing bolts and cut out the hole in the firewall a little. I cut the stock push rod and welded it to the rod on the Jeep booster to get the length right. The only issue is that I don't have a good seal where the rod comes trough the firewall and some hot air comes in. I'll find a boot that will fit one day.

Jcrum:
Thanks for the in put. I was just looking for a cheap diy power brake system.

JustaFordGuy:
It was cheap, $25 for the booster and I used my original master cylinder. ;)

Navigation

[0] Message Index