BigBendBroncos

Bronco Tech => General Tech => Topic started by: Jcrum on May 22, 2013, 08:14:29 AM

Title: Jeep Cherokee Power brakes
Post by: Jcrum on May 22, 2013, 08:14:29 AM

Hey Gary
what year jeep did your Power brake booster from. Was it new or used and I wanting to see if you have any more pictures to see how much clearance have.


http://www.bigbendbroncos.com/forum2/index.php?topic=22.msg127#msg127

Title: Re: Jeep Cherokee Power brakes
Post by: JustaFordGuy on May 22, 2013, 10:49:21 AM

I'm thinking it was a mid to late 90s Cherokee but I'm not positive. I got it from Pick & Pull. I really had to rig it to make it fit but it works great. I made a bracket about 2" wide to bolt it to the existing bolts and cut out the hole in the firewall a little. I cut the stock push rod and welded it to the rod on the Jeep booster to get the length right. The only issue is that I don't have a good seal where the rod comes trough the firewall and some hot air comes in. I'll find a boot that will fit one day.

Title: Re: Jeep Cherokee Power brakes
Post by: Jcrum on May 22, 2013, 03:17:19 PM

Thanks for the in put. I was just looking for a cheap diy power brake system.

Title: Re: Jeep Cherokee Power brakes
Post by: JustaFordGuy on May 22, 2013, 03:47:05 PM

It was cheap, $25 for the booster and I used my original master cylinder. ;)