+- +-

+-Stats

Members
Total Members: 116
Latest: broncogirl2021
New This Month: 0
New This Week: 0
New Today: 0
Stats
Total Posts: 2922
Total Topics: 389
Most Online Today: 41
Most Online Ever: 123
(May 05, 2024, 09:05:07 AM)
Users Online
Members: 0
Guests: 20
Total: 20

Author Topic: Chipper 300 EFI Upgrade  (Read 3154 times)

Rev

  • Jr. Member
  • **
  • Posts: 88
Re: Chipper 300 EFI Upgrade
« Reply #15 on: December 30, 2012, 04:29:33 PM »
Not even close, with the Holidays and all have not had time to think about it. But after next weekend I will be back on it, just got to get me some injectors.

Rev

  • Jr. Member
  • **
  • Posts: 88
Re: Chipper 300 EFI Upgrade
« Reply #16 on: January 18, 2013, 01:36:10 PM »
Back at it, Got the injectors, Thanks again Lonesouth!
Injectors and wiring for them DONE!
Upper, lower, and exhaust manifolds BOLTED ON!
Up next, pull radiator, Harmonic Balancer, and thermostat housing, Have to add a timing pointer, mine broke off, Add Thermostat housing from the F-150 so i can get the Temp sensor, Relocate radiator 2 inches forward, need to gain some room so I can run a mechanical fan or a Taurus fan. Should have this stuff done today. Anyone bored come on over!

lonesouth

  • Bronco Guru
  • *****
  • Posts: 569
Re: Chipper 300 EFI Upgrade
« Reply #17 on: January 18, 2013, 01:43:12 PM »
no pcitures?
1977 Bronco U15 ,351w,C4,PS,PB,1"BL,32s

BroncoBlair

  • Sr. Member
  • ****
  • Posts: 459
  • Bronco Enthusiast
Re: Chipper 300 EFI Upgrade
« Reply #18 on: January 18, 2013, 02:11:13 PM »
sounds like we are all trying to get them ready for SOWEGA.  Hope all goes well cant wait to see everyone on the trails again.


JustaFordGuy

  • Gary Cook
  • Administrator
  • Bronco Guru
  • *****
  • Posts: 1558
Re: Chipper 300 EFI Upgrade
« Reply #19 on: January 18, 2013, 02:18:04 PM »
You're making good progress.  GO REV GO    ;D
77 Bronco, 302, 4bbl, Hei, C4, PS, PB, BCB-A/C, 35" MTs, D44/Lock-Right Chromo axles, 9"/Grizzly locker, 2.5" sl, 1" bl, Bilstein shocks, 1 ton steering, JB-fab twin stick, D20,

2005 F250 CCSB Lariat FX4
2022 Jeep Rubicon 4Xe

Rev

  • Jr. Member
  • **
  • Posts: 88
Re: Chipper 300 EFI Upgrade
« Reply #20 on: January 18, 2013, 05:01:42 PM »
Balancer off and back on, Serp setup is going to have to wait, will need major mods to work with the motor sitting 3 inches lower than stock, Will post some pictures after dinner.
Got the dist. swapped, and a few little things done. Tomorrow I mount the coil, run the wiring, and then figure out the fuel system. and maybe get the core support mods done.
 If all goes well I will be working on the exhaust Sunday!

Rev

  • Jr. Member
  • **
  • Posts: 88
Re: Chipper 300 EFI Upgrade
« Reply #21 on: January 20, 2013, 06:52:25 PM »
Pics

Rev

  • Jr. Member
  • **
  • Posts: 88
Re: Chipper 300 EFI Upgrade
« Reply #22 on: February 08, 2013, 09:59:04 PM »
UGH

Working on the EFI today found out there are issues with the donor wiring and computer, Fuel pump was shot to, soooooooo

Pissy me snatched all the EFI stuff off and put it back to carb, started it up tonight and Chipper is being real pissy! Got a miss in it,

Tomorrow I check that out, and repair the firewall, albet temp. GRRRRRR

Should have listend to dad's voice when I started this, "If it ain't broke id don't need fixed"

JustaFordGuy

  • Gary Cook
  • Administrator
  • Bronco Guru
  • *****
  • Posts: 1558
Re: Chipper 300 EFI Upgrade
« Reply #23 on: February 09, 2013, 10:09:00 AM »
Dang man, I hate to hear the computer is crapped out. Maybe after you get it running right again carbed you can spend some time on getting the EFI stuff all together.
77 Bronco, 302, 4bbl, Hei, C4, PS, PB, BCB-A/C, 35" MTs, D44/Lock-Right Chromo axles, 9"/Grizzly locker, 2.5" sl, 1" bl, Bilstein shocks, 1 ton steering, JB-fab twin stick, D20,

2005 F250 CCSB Lariat FX4
2022 Jeep Rubicon 4Xe

Rev

  • Jr. Member
  • **
  • Posts: 88
Re: Chipper 300 EFI Upgrade
« Reply #24 on: February 09, 2013, 10:54:33 AM »
Thats the plan Gary, Not gonna take her back down again until I know everything is in order and I have a BBQ and Beer weekend get together of Bronco Buddies.

Rev

  • Jr. Member
  • **
  • Posts: 88
Re: Chipper 300 EFI Upgrade
« Reply #25 on: February 09, 2013, 04:08:50 PM »
Gave her the attention she has been craving, she showed her ass a bit, but in the end just like a woman, a little money spent on them makes them happy! Going for a ride...................

No EFI but now I know what I am up against...

lonesouth

  • Bronco Guru
  • *****
  • Posts: 569
Re: Chipper 300 EFI Upgrade
« Reply #26 on: February 09, 2013, 04:38:03 PM »
glad you were able to get it back together and running!
1977 Bronco U15 ,351w,C4,PS,PB,1"BL,32s

 

Recent Posts

Our 23 Bronco is finally here!!! by JustaFordGuy
January 20, 2023, 03:00:09 PM

Carburetors by broncobob
May 07, 2022, 12:36:24 PM

Re: Wheels and Water event Marianna Florida by JustaFordGuy
February 06, 2020, 02:32:40 PM

Wheels and Water event Marianna Florida by kat
February 05, 2020, 05:42:45 PM

Re: Frame off Restoration by JustaFordGuy
November 25, 2019, 02:19:42 PM

Frame off Restoration by geofw78
November 23, 2019, 06:52:04 PM

Dana 20 Transfer Case by broncobob
June 10, 2019, 10:16:19 AM

Re: Bronco Sightings by JustaFordGuy
April 25, 2019, 01:17:47 PM

Powered by EzPortal