Forum > Builds/Projects

Wild Horses 1" Body Mount Kit

(1/1)

JustaFordGuy:
I got my Wild Horses 1" Body Mount Kit installed this weekend. For some reason a few of the bolts weren't the right length but I had some bolts that fit so it went on OK. I had to adjust my column shifter and lower my fan shroud but it was no problem. It took my son and I a few hours total. The only mess up we had was the negative battery cable. It was too short and when we jacked up the body the end of the cable pulled off. I just soldered it back on and bolted it up higher on the block. ;D

When I removed my rear bumper I discovered that some sort of rodent had made a nest in my frame rail .:o I vacuumed it out and spayed some frame saver spray in the rails to stop any rust (been wanting to do this for a while).  Should be good to go now. ;)

lonesouth:
Where's the before and after pics?

BroncoBlair:
Mine wasnt to bad either, just had to re adjust shifter linkage. sure made a big difference over the 3" no bushing lift i took off

JustaFordGuy:

--- Quote from: lonesouth on February 11, 2013, 01:22:31 PM ---Where's the before and after pics?

--- End quote ---

You know what it looked like before, now it's 1" taller. ;D

It really doesn't look any different.

Navigation

[0] Message Index

Go to full version