BigBendBroncos

Classifieds => Bronco Parts Wanted => Topic started by: lonesouth on January 23, 2013, 11:53:13 AM

Title: Need 2 flat stock 2" x 3' x 1/8" steel or aluminum
Post by: lonesouth on January 23, 2013, 11:53:13 AM

anyone got some laying around?

Title: Re: Need 2 flat stock 2" x 3' x 1/8" steel or aluminum
Post by: JustaFordGuy on January 23, 2013, 01:14:44 PM

I don't think I have any but I'll look.

What ya makin?

Title: Re: Need 2 flat stock 2" x 3' x 1/8" steel or aluminum
Post by: lonesouth on January 23, 2013, 01:21:42 PM

need to put down a platform that will span the bed ribs to provide a flat mounting surface for the rear seats.

Title: Re: Need 2 flat stock 2" x 3' x 1/8" steel or aluminum
Post by: JustaFordGuy on January 23, 2013, 01:26:39 PM

Gotcha, I'll see what I have tonight.

Title: Re: Need 2 flat stock 2" x 3' x 1/8" steel or aluminum
Post by: Rev on January 26, 2013, 08:47:16 AM

If you have an electrician friend see if they have any Stainless unistrut. Works great.