BigBendBroncos

Bronco Tech => General Tech => Topic started by: 75JOE on December 09, 2012, 09:30:46 PM

Title: Am I Hosed
Post by: 75JOE on December 09, 2012, 09:30:46 PM

So I decide to take the 75' to Target to get a replacement string of icicle lights.  Stop at the Chevron to add air to one of the tires.  Re-start it and the starter would not disengage even when I turned the ignition off.

Before I can get the battery disconnected it stops.  Tried to restart and can tell starter is toast.

Quick call to AAA and delivery home (the guy from Grant's Towing was great), I pull the starter and confirm it is finished. 

My biggest concern is the three tweaked teeth on the flex plate.

Starter and solenoid were replaced about three months ago during re-build (Motorcraft starter).

Anyone have an idea as to the cause of this?  Is the flex plate bad enough to have to replace?



 

Title: Re: Am I Hosed
Post by: JustaFordGuy on December 10, 2012, 09:06:14 AM

It was the solenoid that caused it. I've had them do the same to me several times. Most of these electrical parts are cheep Chinese junk. I've had them bad right out of the box. I would just get a new starter and solenoid and keep your fingers crossed on the flexplate. I've heard that the later style Ford solenoid is better and be sure you get the best quality one you can find. You should also change the starter to the later gear reduction type. They are much stronger and use a lot less battery power.

Title: Re: Am I Hosed
Post by: 75JOE on December 10, 2012, 11:32:08 AM

Thanks Gary.  Is there a local source on the starter or better to go through one of the vendors?

Title: Re: Am I Hosed
Post by: JustaFordGuy on December 10, 2012, 01:00:21 PM

I got mine and Blair's from an Ebay store called DB Electrical. Here is the one I got, it's all new not rebuilt.

http://www.ebay.com/itm/NEW-Ford-Mini-PMGR-Racing-Starter-302-351-Higher-Torque-/130682177932?pt=Motors_Car_Truck_Parts_Accessories&hash=item1e6d43c98c (http://www.ebay.com/itm/NEW-Ford-Mini-PMGR-Racing-Starter-302-351-Higher-Torque-/130682177932?pt=Motors_Car_Truck_Parts_Accessories&hash=item1e6d43c98c)

Title: Re: Am I Hosed
Post by: 75JOE on December 10, 2012, 01:22:53 PM

Thanks.

Title: Re: Am I Hosed
Post by: lonesouth on December 10, 2012, 02:35:36 PM

heck of a price too :)

Title: Re: Am I Hosed
Post by: JustaFordGuy on December 11, 2012, 09:20:49 AM

Yeah, I don't think you can buy a reman much cheaper.

Keep in mind that if you go with the new style starter that you have to wire the solenoid a little different but it's an easy change.

Title: Re: Am I Hosed
Post by: 75JOE on December 11, 2012, 10:21:56 AM

Thanks again.  Have one in route.

Title: Re: Am I Hosed
Post by: 75JOE on December 16, 2012, 08:37:21 PM

Installed it this afternoon.  Works great.  Thanks for the reccomendation.  The smaller size and reduced weight does make the install easier.

Looks like I dodged a bullet on the flex plate. ;D

Title: Re: Am I Hosed
Post by: JustaFordGuy on December 17, 2012, 09:04:08 AM

That's great news, glad it was an easy fix. ;D